AKYAPAK-AHS-UserManual-2019.03.11
NOISE EMISSION RATE
• When measured as per EN ISO 3746, Noise Emission Rate shall be: 102.4dB.
Machined workpiece material shall be steel and its derivatives when the machine is
measured against operating conditions. If the correctness of declared emission
values are to be checked, measurement shall be made by using the declared
measurement method and providing the same operating conditions.
• Noise declaration shall be provided with the following expression. Figures declared
for noise are emission rates and these does not indicate the safe operation levels.
• Although there is a correlation between emission and exposure rates, a reliable
measurement may have to be performed in order to determine if more advanced
precautions are required.
• Factors affecting the real exposure rates affecting the workforce are the properties of
the work place, including the exposure period; in other words, number of other noise
sources, nearby operations and machines. Moreover, permissible exposure level may
vary according to country. However, this declaration allows the user of the machine
to assess dangers and risks better.
• All worker who will be employed in workplaces with a noise level of 80 dB and higher
shall be trained on possible effects of noise on hearing, purposes, advantages,
disadvantages of ear protectors, determination of the suitable protector type,
maintenance of cleaning of the protector etc. before starting to work. We
recommend repeating these trainings every year.
GENERAL SAFETY INFORMATION
• Power cord shall be routed to prevent stepping or putting something on it. Pay
special attention to the areas where the cord leaves the panel and enters the
machine.
• If the mains cord gets damaged during operation, do not touch the cord and remove
the mains plug from the panel. Never use a damaged power cord.
• Do not load over the bending values specified in operation manual. Your machines
and devices operate more safely in the specified power capacities.
• Do not put your hands between moving parts to take foreign materials out.
To Next Page
Loading...
