AKYAPAK-AHS-UserManual-2019.03.11
IMPORTANT SAFETY PRECAUTIONS
SAFETY
Machine is designed as conforming to the normal safety rules. However, machine may cause
accidents with risk of personal injury or death. Moreover, unsuitable operating conditions
may cause damage on the machine. Machine shall be used as per its intended use. Injuries
may occur when the machine is not used as per its intended use. AKYAPAK is not responsible
for such a condition. Basic safety rules shall be followed in order to ensure machine
operation without faults, risks or without causing an injury. Safety operations shall be well-
known by the authorized person operating the machine. Additionally, general safety rules
shall be followed.
SAFETY INFORMATION
In addition to the recommendations in this operation and maintenance manual, all local
accident protection and environment protection legislation shall be followed. All issues such
as safety information etc. related with the machine shall strictly be considered. Machine is
covered with protective parts for safety reasons in order to prevent ingress of any foreign
material, hand or arm to the moving or rotating parts of the machine while it is operated.
Following symbols are safety symbols that shall be read and followed with special attention.
STOP DANGER MANDATORY WARNING
User may cause damage on the equipment or injury to himself when these symbols are not
read or are neglected.
Stop symbol is used to indicate conditions where system/machine shall be
stopped, turned off, paused or released.
To Next Page
Loading...
