AKYAPAK-AHS-UserManual-2019.03.11
Tighten the ropes before carrying and then lift the machine evenly, because the fixed weight
is on the reducer side (not on the cylinders). Do not loosen the ropes, otherwise the rope
slide and machine jerks.
REMOVEL OF PACKAGE
Hydraulic cylinder machine is covered water-proof foil and greased to prevent it being
affected from weather conditions during transport.
Use suitable tar paper for vehicles with open beds or protect from weather conditions with
other types of coverings during transport.
Contact the transporter or dealer immediately if you observe any transport damage during
the removal of the package.
Use work gloves during the removal of the package.
Especially, if the packing material is composed of material with high plastic or chemical
content, you should avoid contact of material with children, and adults shall remove the
package with protective gloves.
Cleaning of machines lubricated with protective oil is as follows:
• Clean the cylinders and bright surfaces with thinner.
• Clean the painted surfaces using a mixture of diesel oil and water.
PLACEMENT PLAN OF THE MACHINE
Placement area of the machine shall be adjusted as per the placement information and plan.
Check the position of the machine, and then fix it. Use precision level to place the machine
correctly, check for any cracks.
To Next Page
Loading...
