AKYAPAK-AHS-UserManual-2019.03.11
MACHINE SAFETY INFORMATION
All power equipment are potentially dangerous.
Do not put your hands in the operation area. There are compression and bending equipment
in this area. Remove all your jewellery such as rings, watches etc. when you are operating
the machine.
Do not wear loose or baggy clothes such as unzipped or unbuttoned jackets, scarves, torn
clothes or ties etc.
We recommend you to wear protective equipment such as hard hats, ear protectors,
protective glasses and dust mask etc. Consult your employer on the protection rules and
equipment.
Do not attempt to operate the machine when a fault condition occurs. Ensure that all
potential risks are removed before operating the machine.
Inform AKYAPAK/maintenance personnel if a fault is observed on the machine operations.
Provide adequate illumination for safe operating conditions.
All safety and protection equipment’s shall be used for perfect efficiency. Warning signs on
the machine and recommendation in the operation manual shall always be followed.
It is strictly forbidden to operate the machine when the protective covers, safety switches
and any similar safety equipment are removed.
Authorized personnel shall be used for lifting and moving the machine (displacement of the
machine), and maintenances on the electrical and hydraulic systems.
It is strictly forbidden to modify any component or change the position of a component on
the machine.
It is forbidden to make any adjustment, cleaning or maintenance while the machine is being
operated.
Always follow “Danger” and “Warning” signs on any machine equipment!
If it is operated incorrectly, conditions that may cause injury or death to the operator or
damage to materials or machine may occur.
Besides that, if the conditions specified under 'Warning' are not applied, this may cause
significant damages in some conditions.
As a result, you shall always pay attention to following.
To Next Page
Loading...
