AKYAPAK-AHS-UserManual-2019.03.11
GENERAL PRECAUTIONS
The protective precautions specified in this manual may change according to the machine
and its specifications.
AKYAPAK is not responsible for any damage that may occur if the standard equipment on the
machine is modified without the approval of AKYAPAK or if non-standard products are used
in the replacement machine components.
Consult AKYAPAK if the safety equipment or warning labels on the machine are damaged or
missing.
SAFETY OF THE EMPLOYEES WORKING ON THE MACHINE
Personnel shall be trained on the following points before operating the machine:
Basic safety and accident prevention instructions,
Conformity to the safety rules and periodical inspections for conformity,
Illumination of the surroundings and required areas.
Personnel who would be working with the machine shall use work clothes that fits on their
body.
As loss of concentration and any illness would cause loss of reflexes and distraction,
operator shall not operate the machine in such conditions.
PERSONAL PROTECTION EQUIPMENT
Following protective equipment are recommended to be used.
• Strong gloves to prevent cutting, puncturing or stinging conditions while handling the
material,
• Earplugs that provide protection against noise,
• Glasses against chipping that may be splattered,
• Protective boots during handling of materials with a certain weight and size.
WARNING
To Next Page
Loading...
