AKYAPAK-AHS-UserManual-2019.03.11
PRODUCT INTRODUCTION
All operating movements of plate bending machine are performed manually.
Plate material prepared for using in various fields in the industry is placed on the machine in
order to bend it in the specified way.
Then, desired form is obtained by bending it as specified in the operation manual.
Standard features of our machine:
• Conical bending mechanism
• Induction hardened rolls
• Digital indicator for side rolls
• Completely steel (ST-52) welded construction machine body
• Separate control panel
• Double speed control
• Rolls mounted in bearing
• Upper roll cover that opens and closes hydraulically from the control panel. Upper
roll is raised automatically when the cover is opened.
• Conical opening and closing via control panel.
• Hydraulic motor and planetary reducer driven central rolls (upper and lower rolls)
• Calibration
• Registered manufacturing quality with CE, ISO 9001-2008, TSEK and TURQUM
certificates.
Also, in order to facilitate the bending operation:
• Infinitely adjustable rotation speed
• Side and central supporters for big sheet metal diameters
• Material feed table
• CNC Graphical control system
• NC Playback control system
• Replaceable upper roll (for smaller diameters)
• Oil cooling system Motors with different voltages and frequencies
To Next Page
Loading...
