AKYAPAK AHS - Adjustment of Evenness of Lower Roll; Maintenance; Preventive Maintenance

A: Akçalar Sanayi Bölgesi Sanayi Cad.
No: 8/A 16225 Akçalar BURSA / TURKEY
T: +90 224 280 75 00
F: +90 224 280 75 01
E: info@akyapak.com.tr
W: akyapak.com.tr
Page: 65/94
AKYAPAK-AHS-UserManual-2019.03.11
ADJUSTMENT OF EVENNESS OF LOWER ROLL
CAUTION Ensure that conical bending device is turned off before performing the operation
described above. If x<y, adjustment screw (B) is rotated counter-clockwise.
If x>y, adjustment screw (B) is rotated clockwise.
If x=y, roll are parallel.
MAINTENANCE
Maintenance and cleaning operations shall be performed correctly in order to achieve high
efficiency.
We can divide maintenance operations to two groups.
1. Preventive maintenance
2. “Maintenance and repair” due to errors
PREVENTIVE MAINTENANCE
Preventive maintenance is the maintenance performed as a precaution before an error
occurs. These precautions are:
• Regular lubrication, and checking of oil level (of the reducer and hydraulic reservoir)
• Regular cleaning
• Cleaning of the material to be bent
• Checking of wearable parts
• Checking of cracks