AKYAPAK-AHS-UserManual-2019.03.11
Danger symbol provides warning against specific risks and it shall always be
read. If this symbol is neglected, damage to equipment or injury to staff may occur.
Mandatory symbol indicates the obligation to perform or not to perform some
operations or actions in the operation areas or the obligation to make some material
available or not (For example, grounding line is mandatory, keeping flammable substances
away is mandatory etc.)
Warning symbol indicates that personnel shall act with caution and attention
and keep their movements in specified limits in order to prevent injuries.
Read the manual carefully before operating the machine and making maintenance on it.
OPERATING AREA SAFETY
Always keep the machine and your equipment clean so that they can be operated at any
time and follow the instruction on maintenance operations and replacement of accessories
in order to work safely.
Check the plugs and cables periodically. Have AKYAPAK or an authorized technician replace it
when it is damaged.
Prevent soiling of the handles and grips with oil and grease.
Ensure that the operation area is neat and well-illuminated.
Never put any material inside the specified limits around the machine. Remove the dust and
chippings on the floor, disorder increases the risk of accidents.
Machine checks and operation shall be performed by the same operator.
It is very dangerous using the machine by several persons, avoid such a condition.
To Next Page
Loading...
