AKYAPAK AHS - Installation Information

A: Akçalar Sanayi Bölgesi Sanayi Cad.
No: 8/A 16225 Akçalar BURSA / TURKEY
T: +90 224 280 75 00
F: +90 224 280 75 01
E: info@akyapak.com.tr
W: akyapak.com.tr
Page: 38/94
AKYAPAK-AHS-UserManual-2019.03.11
INSTALLATION INFORMATION
Consider the following before installing the machine.
1. Adequate space around the machine shall be left to access any part of the machine for
maintenance.
2. There shall be a distance 1.5 times more of the sheet length on the front of the machine
to provide lifting of the material freely. (L*1.5)
3. Leave a space on both sides of the machine to provide easy bending of the material and
leave another 1 meter of space for walking space.
On the area where the machine shall be placed, leave specified distances from the side and
rear walls as shown in the figure below, and install it in the safe operation area. The surface
where the machine shall be placed shall be level, and have the qualities to bear the machine
weight. Ensure that the legs of the machine are placed on the ground.