AKYAPAK AHS - Reducer Faults and Maintenance Throughout the Machine; Intervention to Reducers; Operation; Maintenance

A: Akçalar Sanayi Bölgesi Sanayi Cad.
No: 8/A 16225 Akçalar BURSA / TURKEY
T: +90 224 280 75 00
F: +90 224 280 75 01
E: info@akyapak.com.tr
W: akyapak.com.tr
Page: 87/94
AKYAPAK-AHS-UserManual-2019.03.11
REDUCER FAULTS AND MAINTENANCE THROUGHOUT THE
MACHINE
REDUCERS SAFETY INSTRUCTIONS
INTERVENTION TO REDUCERS
Improper and uncontrolled work may cause injuries. Installation and maintenance of
reducers shall be performed by trained technical staff.
Foreign material in the surroundings may cause serious injuries. Ensure that there are no
foreign material and tools around the reducer before operating it.
OPERATION
Hot surfaces may cause burns. If the operating temperature is high, do not touch reducer
surfaces or use suitable gloves.
Rotating elements may cause injuries. There is a risk of scattering parts or being rolled and
pulled in. Stay away from the rotating elements and ensure that housings of all elements are
closed.
MAINTENANCE
Unintentional operation of the machine during maintenance may cause serious accidents.
Ensure that no one can start the machine while you are performing maintenance.
Even a short period of operation of the machine during maintenance may cause accidents if
safety devices are not working properly. Ensure that safety devices are installed and
activated.
LUBRICATION
Intensive contact with oil may cause irritation of the skin. Avoid intensive contact with oil
and clean oil on your skin thoroughly.
Hot oil may cause burns. Do not contact oil during oil replacement.
WARRANTY CONDITIONS
Standard reducers are suitable for operation in ambient temperatures from +5º C to +40ºC.
Operating reducers out of this interval of ambient temperatures may damage the reducer
and the environment.
Reducers shall be protected against rain, snow and dust.