AKYAPAK AHS - Page 88

A: Akçalar Sanayi Bölgesi Sanayi Cad.
No: 8/A 16225 Akçalar BURSA / TURKEY
T: +90 224 280 75 00
F: +90 224 280 75 01
E: info@akyapak.com.tr
W: akyapak.com.tr
Page: 88/94
AKYAPAK-AHS-UserManual-2019.03.11
MAINTENANCE AND INSPECTION
Reducer shall be inspected in the intervals specified below under normal ambient and
operating conditions.
Element to be checked
or replaced
Every 3000
operating hours
or every 6
months
Every 4000
operating
hours
Every 10000
operating
hours or every
3 years
Every 25000
operating
hours
Oil leak inspection
X
Oil level inspection
X
Oil leak inspection from
the seal
X
Bearing noise inspection
X (if required)
Mineral oil replacement
X (See below
for details)
Synthetic-PAO oil
replacement
X (See below
for details)
Seal replacement
X (See below
for details)
Bearing grease
replacement
X (See below
for details)
Bearing replacement
X (See below
for details)
Change in the noise
inspection
X (See below
for details)