AKYAPAK-AHS-UserManual-2019.03.11
• Use safety goggles and ear protectors. Do not wear loose clothes and jewellery.
These may be caught by moving parts.
• Always keep the work area clean, dry and neat, irregularities in work place cause risk
of accident.
• Use proper illumination and lights for the safety and health of the operator. (ISO
8995-89 Standard the lighting of indoor work system)
• Do not place anything on the machine.
• Do not use any other material than the ones specified by the manufacturer while
bending on the machine.
• Always keep the machine and your equipment clean so that they can be operated at
any time in order to work safely.
• Do not put much strain on your working position, ensure that you have a safe
posture, and always keep your balance.
• Follow the instructions on maintenance and replacement of accessories. Check the
plugs and cables periodically. Have an authorized technician replace it when it is
damaged.
• Remove the power supply connections when the machine is not operated or before
maintenance operations.
• Ensure that wrenches or setting devices are removed before operating the machine.
• Use recommended extension cords specified for this purpose only if you have to
operate it outdoors.
• Repairs shall only be performed by technicians. Otherwise, this may cause a risk of
accident for the user.
• Check whether protective equipment or lightly damaged components work properly
and perfectly before starting a new work. All components shall be properly installed
and all conditions for perfect operation shall be met. Damaged protective equipment
or components shall be repaired or replaced by the manufacturer or authorized
dealer properly.
• Do not operate machines where switches and breakers do not perform the turn
on/off function.
To Next Page
Loading...
