AKYAPAK-AHS-UserManual-2019.03.11
purchased from AKYAPAK are replaced without authorization or using accessories in a
different way than the recommendations provided here. AKYAPAK has no legal responsibility
or obligation in such operations. Machine warranty shall be void if any condition specified
are valid.
Switch the power off (including main power) while installing or removing the machine or
while replacing any part/tool and wait for 5 minutes, then you can make the operations;
otherwise, this may cause an electric shock or malfunction.
Turn the power off (including main power) before daily inspection.
An electric shock may occur if you make inspection or maintenance with the power on.
Operator company shall put warnings signs such as 'Do not turn on the power', 'Do not
operate the machine' etc. on control panel, its surroundings etc. to prevent machine
operation, maintenance and inspection by unauthorized persons.
Do not remove and install electrical connections of the machine when the power is on. This
may cause electric shock and accidents.
If any error alarm is indicated on the program, solve this condition. Run the program again
after resolving the error.
Ensure that all screws are tightened, no tools are left in the vicinity of machine, and all
covers of the control panel and machine are closed after completing the maintenance and
inspection. Otherwise, electric shock, fire and accidents may occur.
AKYAPAK shall not be responsible for damages, accidents and injuries that may occur if the
user changes the machine pattern on his own.
To Next Page
Loading...
