Alcatel-Lucent 7210 SAS M - Page 151

Boot Option Files
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 151
tertiary-config cf2:\SASR2553.cfg
#eth-mgmt Port Settings:
no eth-mgmt-disabled
eth-mgmt-address 10.135.25.53/24 active
eth-mgmt-address 10.135.25.54/24 standby
eth-mgmt-route 2.2.2.0/24 next-hop 10.135.25.1
eth-mgmt-route 3.3.3.0/24 next-hop 10.135.25.1
eth-mgmt-route 10.135.0.0/16 next-hop 10.135.25.1
eth-mgmt-route 135.0.0.0/8 next-hop 10.135.25.1
eth-mgmt-autoneg
eth-mgmt-duplex full
eth-mgmt-speed 100
#System Settings:
wait 3
persist off
console-speed 115200
no console-disabled
Do you want to overwrite cf1:/bof.cfg with the new settings? (yes/no): y
Successfully saved the new settings in cf1:/bof.cfg
Configuring Network with eth-mgmt Port Setting.....
Primary config file present at: uf1:\SASR2553.cfg
Sap Index file present at: uf1:\SASR2553.sdx
Primary image location: ftp://*:*@135.250.26.204/tmp/sasr/b/
Initial DNS resolving preference is ipv4-only
Loading image ftp://*:*@135.250.26.204/tmp/sasr/b/cpm.tim
Version C-6.1.R3, Wed Jun 4 10:32:00 IST 2014 by builder in /home/builder/6.1B1/R3/panos/
main
text:(35757600-->121586864)
telnet>