System Commands
Page 474 7210 SAS M, T, X, R6 Basic System Configuration Guide
Non-DST Zone : PST Offset from UTC : -8:00
Zone type : standard
-------------------------------------------------------------------------------
DST Zone : PDT Offset from Non-DST : 0:60
Starts : first sunday in april 02:00
Ends : last sunday in october 02:00
============================================================================
A:ALA-1#
A:ALA-1# show system time (with no DST zone configured)
===============================================================================
Date & Time
===============================================================================
Current Date & Time : 2006/05/12 11:12:05 DST Active : no
Current Zone : APA Offset from UTC : -8:00
-------------------------------------------------------------------------------
Non-DST Zone : APA Offset from UTC : -8:00
Zone Type : non-standard
-------------------------------------------------------------------------------
No DST zone configured
===============================================================================
A:ALA-1#
vwm-shelf
Syntax vwm-shelf vwm-shelf-id [detail]
Context show>system
Description List all the shelves connected to the 7210 SAS node and display the administrative and operational
state of the connected shelves.
VWM-Shelf output — The following table describes the VWM-shelf output fields.
Table 36: Show VWM-shelf Output Fields
Label Description
Shelf-ID
Configured shelf-ID for the 1830 VWM shelf connected to the 7210. It
must match the rotary dial setting on the 1830 device.
USB/l2C
Type of connection used to connect to the 1830 VWM shelf.
Admin State
The administrative state of the shelf. It is shown as UP if user has
enabled the shelf in the configuration.
Oper State
Operational state of the shelf. It is set to up if the admin state is UP and
the 7210 node is able to communicate successfully with the shelf.
Number of Equipped
slots
Number of line cards in use on the shelf.
To Next Page
Loading...
Need help?
General
