System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 475
Sample Output
Sample output for 7210 SAS-M, SAS-T, and 7210 SAS-X devices:
*A:7210SAS>show>system# vwm-shelf
===========================================================================
Shelf Summary
===========================================================================
Shelf-ID USB/ Admin Oper Number of
OMC State State Equipped slots
---------------------------------------------------------------------------
7 USB UP UP 2
===========================================================================
*A:7210SAS>show>system#
Sample output for 7210 SAS-T devices:
Slot-ID
Card identifier used to identify the card inserted into the slot #1 of the
1830 device.
Provisioned Type
User provisioned card-type to identify the module inserted into the
1830 device.
Equipped Type
The card-type currently inserted into the slot on the 1830 device.
No of Slots
The number of slots available on the 1830 device.
Part Number
The 1830 VWM CWDM device part number.
CLEI code
CLEI code of the 1830 device.
Unit Mnemonic
The Mnemonic string used to identify the card.
Serial Number
The 1830 device serial number.
Manufacturing
Date
The manufacturing date of the card.
Administrative
state
The administrative state of the 1830 device. If the shelf or card is pro-
visioned and if no shutdown is executed, the this field displays UP, else
it displays 'Down'.
Operational state
The operational state of the 1830 device. It is set to UP if the 7210 SAS
device is able to communicate and retrieve information from the 1830
device connected to it. It is set to Down otherwise.
Current Alarm
state
Displays if alarm is active or cleared.
Table 36: Show VWM-shelf Output Fields (Continued)
Label Description
To Next Page
Loading...
