Alcatel-Lucent 7210 SAS M Configuration Guide

System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 285
System Administration Parameters
Use the CLI syntax displayed below to configure various system administration parameters.
Administrative parameters include:
• Validating the Golden Bootstrap Image on page 285
• Updating the Golden Bootstrap Image on page 286
• Disconnect on page 286
• Set-time on page 287
• Display-config on page 287
• Save on page 289
• Reboot on page 290
• Post-Boot Configuration Extension Files on page 291
Validating the Golden Bootstrap Image
The admin>check-golden-bootstrap command validates the current golden bootstrap image, and
displays its version. A default golden bootstrap image is installed on every 7210 SAS M unit.
CLI Syntax: admin
check-golden-bootstrap
Example : admin# check-golden-bootstrap
The following example displays the output.
version TiMOS-L-0.0.I312
Golden Bootstrap Image validation successful

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English