Alcatel-Lucent 7210 SAS M Configuration Guide

System Information Commands
Page 338 7210 SAS M, T, X, R6 Basic System Configuration
Guide
alarms. 7210 SAS retrieves any information about the equipped module to aid the user with
provisioning.
The no form of the command removes and clears the card-type information. Until the card-type is
provisioned, the 7210 SAS software does not raise any events/traps/alarms for the card and clear all
pending events/traps/alarms/LEDs.
Default No default
Parameters card-type — Identifier used to match the configured slot module with the equipped slot module. The
Table 29 below provides the list of acronyms that can be used to identify the supported modules
usable with the clip-on device.
Values SFC1A|SFC1B|SFC1C|SFC1D|SFC1E|SFC1F|SFC1G|SFC1H|SFC2A&B|SFC2C&D|S
FC2E&F|SFC2G&H|SFC4A-D|SFC4E-H|SFC8
ascii-string - can use ASCII alphabets or numbers. Valid card-type acronyms is
listed in the table below.
The following table lists the acronyms defined by the optical group. For more information, see the
Product overview guide for 1830 VWM. This is used to pre-provision the acceptable modules that can
be equipped in the slots of the clip-on device.
Table 29: Card Type acronyms defined by the optical group
Module Description Acronym
1830 VWM 1-CH CWDM FILTER
(AB VARIANT) - CH1 (1471nm)
SFC1A
1830 VWM 1-CH CWDM FILTER
(AC VARIANT) - CH1 (1491nm)
SFC1B
1830 VWM 1-CH CWDM FILTER
(AD VARIANT) - CH1 (1511nm)
SFC1C
1830 VWM 1-CH CWDM FILTER
(AE VARIANT) - CH1 (1531nm)
SFC1D
1830 VWM 1-CH CWDM FILTER
(AF VARIANT) - CH1 (1551nm)
SFC1E
1830 VWM 1-CH CWDM FILTER
(AG VARIANT) - CH1 (1571nm)
SFC1F
1830 VWM 1-CH CWDM FILTER
(AH VARIANT) - CH1 (1591nm)
SFC1G
1830 VWM 1-CH CWDM FILTER
(AI VARIANT) - CH1 (1611nm)
SFC1H

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English