Alcatel-Lucent 7210 SAS M Configuration Guide

System Administration Parameters
Page 286 7210 SAS M, T, X, R6 Basic System Configuration Guide
Updating the Golden Bootstrap Image
The admin>update-golden-bootstrap command validates the input file, which must be a 7210
SAS M bootstrap image, and updates the golden bootstrap image with the contents of this file.
CLI Syntax: admin
update-golden-bootstrap [<file-url>]
Example : admin# update-golden-bootstrap boot.tim
The following is an example of the output.
Updating Golden Bootstrap Image from "boot.tim"
This operation must not be interrupted
Updating Golden Bootstrap image .... Completed.
Disconnect
The disconnect command immediately disconnects a user from a console, Telnet, FTP, or SSH
session.
Note: Configuration modifications are saved to the primary image file.
CLI Syntax: admin
disconnect [address ip-address |username user-name |
{console|telnet|ftp|ssh}]
Example : admin# disconnect
The following example displays the disconnect command results.
ALA-1>admin# disconnect
ALA-1>admin# Logged out by the administrator
Connection to host lost.
C:\>

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English