Alcatel-Lucent 7210 SAS M - Table 34: Show System SNTP Output Fields

System Commands
Page 470 7210 SAS M, T, X, R6 Basic System Configuration Guide
PTP Recovery State: disabled
Frequency Offset : n/a
-------------------------------------------------------------------------------
Parent Clock
-------------------------------------------------------------------------------
IP Address : 221.0.0.2
Parent Clock Id : 4c5fd2fffe295072 Remote PTP Port : 5
GM Clock Id : 00b0aefffe02e5e5 GM Clock Class : 6
GM Clock Accuracy : within 100 ns GM Clock Variance : 0x6400 (3.7E-09)
GM Clock Priority1: 128 GM Clock Priority2 : 128
===============================================================================
-------------------------------------------------------------------------------
Time Information
-------------------------------------------------------------------------------
Timescale : PTP
Current Time : 2012/12/13 11:05:43 (UTC)
Frequency Traceable : yes
Time Traceable : yes
Time Source : GPS
===============================================================================
===============================================================================
A:7210SAS>show>system#
sntp
Syntax sntp
Context show>system
Description This command displays SNTP protocol configuration and state.
Output Show SNTP Output — The following table describes SNTP output fields.
Sample Output
thresholds
Table 34: Show System SNTP Output Fields
Label Description
SNTP Server
The SNTP server address for SNTP unicast client mode.
Version
The SNTP version number, expressed as an integer.
Preference
Normal — When more than one time server is configured, one
server can be configured to have preference over another.
Preferred — Indicates that this server has preference over another.
Interval
The frequency, in seconds, that the server is queried.