Alcatel-Lucent 7210 SAS M Configuration Guide

System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 471
Syntax thresholds
Context show>system
Description This command display system monitoring thresholds.
Output Thresholds Output — following table describes system threshold output fields.
Label Description
Variable
Displays the variable OID.
Alarm Id
Displays the numerical identifier for the alarm.
Last Value
Displays the last threshold value.
Rising Event Id
Displays the identifier of the RMON rising event.
Threshold
Displays the identifier of the RMON rising threshold.
Falling Event Id
Displays the identifier of the RMON falling event.
Threshold
Displays the identifier of the RMON falling threshold.
Sample Interval
Displays the polling interval, in seconds, over which the data is
sampled and compared with the rising and falling thresholds.
Sample Type
Displays the method of sampling the selected variable and calculating
the value to be compared against the thresholds.
Startup Alarm
Displays the alarm that may be sent when this alarm is first created.
Owner
Displays the owner of this alarm.
Description
Displays the event cause.
Event Id
Displays the identifier of the threshold event.
Last Sent
Displays the date and time the alarm was sent.
Action Type
log — An entry is made in the RMON-MIB log table for each event
occurrence. This does not create a TiMOS logger entry. The RMON-
MIB log table entries can be viewed using the show>system>thresh-
olds CLI command.
trap — A TiMOS logger event is generated. The TiMOS logger utility
then distributes the notification of this event to its configured log desti-
nations which may be CONSOLE, telnet session, memory log, cflash
file, syslog, or SNMP trap destinations logs.
both — Both a entry in the RMON-MIB logTable and a TiMOS logger
event are generated.
none — No action is taken
Owner
Displays the owner of the event.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English