Alcatel-Lucent 7210 SAS M - Table 32: Show Memory Pool Output Fields

System Commands
Page 458 7210 SAS M, T, X, R6 Basic System Configuration Guide
Context show>system
Description This command displays system memory status.
Output Memory Pools Output — The following table describes memory pool output fields.
Sample Output
A:ALA-1# show system memory-pools
===============================================================================
Memory Pools
===============================================================================
Name Max Allowed Current Size Max So Far In Use
-------------------------------------------------------------------------------
System No limit 24,117,248 24,117,248 16,974,832
Icc 8,388,608 1,048,576 1,048,576 85,200
RTM/Policies No limit 5,242,912 5,242,912 3,944,104
OSPF No limit 3,145,728 3,145,728 2,617,384
MPLS/RSVP No limit 9,769,480 9,769,480 8,173,760
LDP No limit 0 0 0
IS-IS No limit 0 0 0
RIP No limit 0 0 0
VRRP No limit 1,048,576 1,048,576 96
Services No limit 2,097,152 2,097,152 1,589,824
IOM No limit 205,226,800 205,226,800 202,962,744
SIM No limit 1,048,576 1,048,576 392
IGMP No limit 0 0 0
MMPI No limit 0 0 0
MFIB No limit 0 0 0
PIP No limit 79,943,024 79,943,024 78,895,248
MBUF 67,108,864 5,837,328 5,837,328 4,834,280
-------------------------------------------------------------------------------
Current Total Size : 343,495,200 bytes
Total In Use : 324,492,768 bytes
Table 32: Show Memory Pool Output Fields
Label Description
Name
The name of the system or process.
Max Allowed
Integer — The maximum allocated memory size.
No Limit — No size limit.
Current Size
The current size of the memory pool.
Max So Far
The largest amount of memory pool used.
In Use
The current amount of the memory pool currently in use.
Current Total Size
The sum of the Current Size column.
Total In Use
The sum of the In Use column.
Available Memory
The amount of available memory.