Alcatel-Lucent 7210 SAS M - Figure 2: Configuration Rollback

Configuration Rollback
Page 48 7210 SAS M, T, X, R6 Basic System Configuration Guide
Figure 2: Configuration Rollback
• A rollback revert does not affect the currently stored rollback checkpoint files (no
deletions or renumbering). This means that if an operator issues a “rollback revert 3” and
then issues a “rollback-save”, the resulting rollback checkpoint files “file-url.rb” and
“file-url.rb.4” will contain the same rollback state/configuration.
• The boot-good-exec or bad-exec are not automatically executed after a rollback.
time
SNMP set
CLI config
rollback save
rollback
checkpoint
rollback save
rollback
checkpoint
rollback save
rollback
checkpoint
rollback revert 2
rollback revert latest
time
SNMP set
CLI config
rollback save
rollback
checkpoint
rollback save
rollback
checkpoint
rollback save
rollback
checkpoint
rollback revert 2
rollback revert latest