Alcatel-Lucent 7210 SAS M - BOF Command Reference

Boot Option Files
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 163
BOF Command Reference
Command Hierarchies
Configuration Commands
bof
— bof-password
— [no] console-disabled
— console-speed baud-rate
— no console-speed
— dns-domain dns-name
— no dns-domain
— [no] eth-mgmt-address ip-prefix/ip-prefix-length
— [no] eth-mgmt-autoneg
— [no] eth-mgmt-disabled
— eth-mgmt-duplex {full | half}
— [no] eth-mgmt-route ip-prefix/ip-prefix-length
— next-hop ip-address
— eth-mgmt-speed speed
— persist {on | off}
— ping-address ip-address
— no ping-address
— primary-config file-url
— no primary-config
— primary-dns ip-address
— no primary-dns
— primary-image file-url
— no primary-image
— save [cflash-id ]
— secondary-config file-url
— no secondary-config
— [no] secondary-dns ip-address
— secondary-image file-url
— no secondary-image
— tertiary-config file-url
— no tertiary-config
— tertiary-dns ip-address
— no tertiary-dns
— tertiary-image file-url
— no tertiary-image
— uplink-mode {access-uplink|network}
— wait seconds
— uplinkA-address ip-address/mask
— no uplinkA-address
— uplinkA-port port-id
— no uplinkA-port
— [no] uplinkA-route ip-address/mask next-hop ip-address
— uplinkA-vlan 0..4094
— no uplinkA-vlan
— uplinkB-address ip-address/mask