Alcatel-Lucent 7210 SAS M Configuration Guide

File Management Commands
Page 184 7210 SAS M, T, X, R6 Basic System Configuration
secondary-dns
[no] secondary-dns ip-address
Context bof
Description This command configures the secondary DNS server for DNS name resolution. The secondary DNS
server is used only if the primary DNS server does not respond.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and also when
defining file URLs. DNS name resolution is not supported when DNS names are embedded in
configuration files.
The no form of the command removes the secondary DNS server from the configuration.
Default no secondary-dns — No secondary DNS server is configured.
Parameters ip-address — The IP address of the secondary DNS server.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x - [0..FFFF]H
d - [0..255]D
tertiary-dns
Syntax tertiary-dns ip-address
no tertiary-dns
Context bof
Description This command configures the tertiary DNS server for DNS name resolution. The tertiary DNS server
is used only if the primary DNS server and the secondary DNS server do not respond.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and also when
defining file URLs. DNS name resolution is not supported when DNS names are embedded in
configuration files.
The no form of the command removes the tertiary DNS server from the configuration.
Default no tertiary-dns — No tertiary DNS server is configured.
Parameters ip-address — The IP address of the tertiary DNS server.
Values ipv4-address - a.b.c.d
ipv6-address - x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English