System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 447
window probe : 0
window update packet : 3
packets received after close : 0
discarded for bad checksum : 0
discarded for bad header offset field : 0
discarded because packet too short : 0
connection request : 4
connection accept : 24
connections established (including accepts) : 27
connections closed : 26 (including 2 drops)
embryonic connections dropped : 0
segments updated rtt : 338742 (of 338747 attempts)
retransmit timeouts : 75
connections dropped by rexmit timeout : 0
persist timeouts : 0
keepalive timeouts : 26
keepalive probes sent : 0
connections dropped by keepalive : 1
pcb cache lookups failed : 0
===============================================================================
A:ALA-12#
cpu
Syntax cpu [sample-period seconds]
Context show>system
Description This command displays CPU utilization per task over a sample period.
Parameters sample-period seconds — The number of seconds over which to sample CPU task utilization.
Default 1
Values 1 — 5
Output System CPU Output — The following table describes the system CPU output fields.
Table 31: Show System CPU Output Fields
Label Description
CPU Utilization
The total amount of CPU time.
Name
The process or protocol name.
CPU Time (uSec)
The CPU time each process or protocol has used in the specified time.