Alcatel-Lucent 7210 SAS M - Figure 12: 7210 SAS-X Front Panel Console Port; Figure 13: 7210 SAS-R6 Front Panel Console Port

Common Configuration Tasks
Page 154 7210 SAS M, T, X, R6 Basic System Configuration Guide
Figure 12: 7210 SAS-X Front Panel Console Port
Figure 13: 7210 SAS-R6 Front Panel Console Port
To establish a console connection:
Step 1 Connect the terminal to the Console port on the front panel using the serial cable.
Step 2 Power on the terminal.
Step 3 Establish the connection by pressing the <Enter> key a few times on your terminal
keyboard.
Step 4 At the router prompt, enter the login and password.
The default login is admin .
The default password is admin .