Service Management Tasks
Page 156 7210 SAS M, T, X, R6 Basic System Configuration Guide
Service Management Tasks
This section discusses the following service management tasks:
• System Administration Commands on page 156
→ Viewing the Current Configuration on page 156
→ Modifying and Saving a Configuration on page 158
→ Deleting BOF Parameters on page 159
→ Saving a Configuration to a Different Filename on page 161
System Administration Commands
Use the following administrative commands to perform management tasks.
CLI Syntax: A:ALA-1# admin
check-golden-bootstrap
debug-save [<file-url>]
disconnect [address <ip-address> | username <user-name> |
{console|telnet|ftp|ssh}]
display-config
[no]enable-tech
reboot [upgrade][auto-init][now]
save [file-url] [detail] [index]
set-time <date> <time>
tech-support <file-url>
update-golden-bootstrap [file-url]
Viewing the Current Configuration
Use one of the following CLI commands to display the current configuration. The
detail
option
displays all default values. The
index
option displays only the persistent indices. The
info
command displays context-level information.
CLI Syntax: admin# display-config [detail|index]
info detail
The following displays an example of a configuration file:
*A:sim169# admin display-config
# TiMOS-B-0.0.I218 both/i386 ALCATEL SAS-M 7210 Copyright (c) 2000-2008 Alcatel-
Lucent.
# All rights reserved. All use subject to applicable license agreements.
# Built on Fri Sep 26 20:46:58 IST 2008 by panosbld in /panosbld/ws/panos/main
To Next Page
Loading...
