Alcatel-Lucent 7210 SAS M Configuration Guide

Boot Option Files
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 179
x - [0..FFFF]H
d - [0..255]D
Values ipv4-prefix-length 0 — 32
Values ipv6-prefix-length 0 — 128
eth-mgmt-autoneg
Syntax [no] eth-mgmt-autoneg
Context bof
Description This command enables speed and duplex Auto-negotiation on the management Ethernet port in the
running configuration and the Boot Option File (BOF).
The no form of the command disables the Auto-negotiate feature on this port.
Default eth-mgmt-autoneg — Auto-negotiation is enabled on the management Ethernet port.
eth-mgmt-disabled
Syntax [no] eth-mgmt-disabled
Context bof
Description This command allows the user to enable or disable the out-of-band management Ethernet port for use
during boot up.
The no form of the command enables the port.
Default eth-mgmt-disabled
eth-mgmt-duplex
Syntax eth-mgmt-duplex {full | half}
Context bof
Description This command configures the duplex mode of the management Ethernet port when Auto-negotiation
is disabled in the running configuration and the Boot Option File (BOF).
This configuration command allows for the configuration of the duplex mode of the Ethernet port. If
the port is configured to Auto-negotiate, this parameter will be ignored.
Default eth-mgmt-duplex full — Full duplex operation.
Parameters full — Sets the link to full duplex mode.
half — Sets the link to half duplex mode.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English