System Management
7210 SAS M, T, X, R6 Basic System Configuration Guide Page 339
shutdown
Syntax [no] shutdown
Context config> system> vwm-shelf>card
Description This CLI command allows the user to administratively disable the management of a specific module
inserted in a slot on the clip-on device. When this command is executed, the 7210 SAS software
clears all pending events/traps/alarms/LED related to this card.
The no form of the command allows the user to administratively enable the management of the card
on the clip-on device. The software raises appropriate events/traps/alarms for the card.
Default no shutdown
1830 VWM 2-CH CWDM FILTER
(AK VARIANT) - CH1,2
SFC2A&B
1830 VWM 2-CH CWDM FILTER
(AL VARIANT) – CH3,4
SFC2C&D
1830 VWM 2-CH CWDM FILTER
(AM VARIANT) – CH5,6
SFC2E&F
1830 VWM 2-CH CWDM FILTER
(AN VARIANT) – CH7,8
SFC2G&H
1830 VWM 4-CH CWDM FILTER
(AP VARIANT) - CH1,2,3,4
SFC4A-D
1830 VWM 4-CH CWDM FILTER
(AP VARIANT) – CH5,6,7,8
SFC4E-H
1830 VWM 8-CH CWDM FILTER
(AA VARIANT) - CH1,2,3,4,5,6,7,8
SFC8
Table 29: Card Type acronyms defined by the optical group
Module Description Acronym
To Next Page
Loading...
