IP Router Command Reference
104 7705 SAR OS Router Configuration Guide
The no form of the command removes the lease time parameters from the configuration.
Default n/a
Parameters days — the IP address lease time in days
Values 0 to 3650
hours — the IP address lease time in hours
Values 0 to 23
minutes — the IP address lease time in minutes
Values 0 to 59
seconds — the IP address lease time in seconds
Values 0 to 59
netbios-name-server
Syntax netbios-name-server ip-address [ip-address...(up to 4 max)]
no netbios-name-server
Context config>router>dhcp>local-dhcp-server>pool>options
config>service>vprn>dhcp>local-dhcp-server>pool>options
Description This command configures up to four Network Basic Input/Output System (NetBIOS) name server IP
addresses.
The no form of this command removes the configuration.
Parameters ip-address — the IP address of the NetBIOS name server in dotted-decimal notation. Up to four
IP addresses can be entered.
Values ipv4-address: a.b.c.d (host bits must be 0)
To Next Page
Loading...
