Alcatel-Lucent 7705 - Table 33 Show Standard Route Table Output Fields

IP Router Command Reference
190 7705 SAR OS Router Configuration Guide
rtr-advertisement
Syntax rtr-advertisement [interface interface-name] [prefix ipv6-prefix/prefix-length] [conflicts]
Context show>router
Description This command displays router advertisement information. If no parameters are specified, all routes are
displayed, sorted by prefix.
Parameters interface-name — the interface name
Values 32 characters maximum
ipv6-prefix/prefix-length — displays only those routes matching the specified IP prefix and prefix
length
Values ipv6-prefix x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
prefix-length 0 to 128
conflicts — displays router advertisement conflicts
Output The following output is an example of router advertisement information, and Table 34 describes the
fields.
Table 33: Show Standard Route Table Output Fields
Label Description
Dest Prefix The route destination address and mask
Next Hop The next hop IP address for the route destination
Type Local — the route is a local route
Remote — the route is a remote route
Proto The protocol through which the route was learned
Age The route age in seconds for the route
Metric The route metric value for the route
Pref The route preference value for the route
No. of Routes The number of routes displayed in the list