Alcatel-Lucent 7705 - Table 24 Show Dhcpv6 Summary Output Fields

IP Router Configuration
7705 SAR OS Router Configuration Guide 165
Sample Output
*A:ALU-48# show router dhcp6 summary
===============================================================================
DHCP6 Summary (Router: Base)
===============================================================================
Interface Name Nbr Used/Max Relay Admin Oper Relay
SapId Resol. Used/Max Server Admin Oper Server
-------------------------------------------------------------------------------
iesSap No 0/0 Down Down
sap:1/2/3:801 0/8000 Down Down
iesintf No 0/0 Down Down
sdp:spoke-5:9999 0/8000 Down Down
-------------------------------------------------------------------------------
Interfaces: 2
===============================================================================
*A:ALU-48#
Arp Populate Specifies whether ARP populate is enabled or disabled
Used/Provided Used — number of lease-states that are currently in use on the specified
interface; that is, the number of clients on the interface that got an IP
address by DHCP. This number is always less than or equal to the
“Provided” field.
Provided — lease-populate value configured for the specified interface
Info Option Keep — the existing information is kept on the packet and the router
does not add any additional information
Replace — on ingress, the existing information-option is replaced with
the information-option from the router
Drop — the packet is dropped and an error is logged
Admin State The administrative state
Interfaces The total number of DHCP interfaces
Table 24: Show DHCPv6 Summary Output Fields
Label Description
DHCP Summary (Router: Base)
Interface Name SapID The name of the interface or SAP/SDP identifier
Nbr Resol. Yes — neighbor resolution (discovery) is enabled
No — neighbor resolution (discovery) is disabled
Table 23: Show DHCP Summary Output Fields (Continued)
Label Description