VRRP Command Reference
260 7705 SAR OS Router Configuration Guide
VRRP Show Commands
policy
Syntax policy [policy-id [event event-type specific-qualifier]]
Context show>vrrp
Description This command displays VRRP priority control policy information.
Parameters policy-id — displays statistics for the specified priority control policy ID
Values 1 to 999
Default all VRRP policy IDs
event-type — displays information on the specified VRRP priority control event within the policy
ID
Values port-down port-id
host-unreachable ip-address
route-unknown ip-prefix/mask
Default all event types and qualifiers
specific-qualifier — displays information about the specific qualifier
Values port-id, ip-address, ip-prefix/mask
Output The following outputs are examples of VRRP policy summary information:
• Policy summary (Sample Output)
• Policy event port-down summary (Sample Output)
• Policy event host-unreachable summary (Sample Output)
• Policy event route-unknown summary (Sample Output)
• Summary of policy output fields (Table 39)
Sample Output
show vrrp policy 1
*A:7705:Dut-A # show vrrp policy 1
===============================================================================
VRRP Policy 1
===============================================================================
Description :
Current Priority: 120 Delta Applied : Yes
Current Explicit: None Current Delta Sum : 120
Delta Limit : 1 Svc Context : None
-------------------------------------------------------------------------------
Applied To VR Opr Base In-use Master Is