Alcatel-Lucent 7705 - IP Filter Entry Matching Criteria

Common Configuration Tasks
296 7705 SAR OS Router Configuration Guide
CLI Syntax: config>filter# ip-filter ipv6-filter-id [create]
entry entry-id
description description-string
action {drop | forward}]
Example: config>filter# ipv6-filter 9
config>filter>ipv6-filter# entry 10 create
config>filter>ipv6-filter>entry$ description "no-91"
config>filter>ipv6-filter>entry$ action drop
config>filter>ipv6-filter>entry# exit
The following example displays an IP filter entry configuration.
A:ALU-7>config>filter>ip-filter# info
----------------------------------------------
description "filter-main"
scope exclusive
entry 10 create
description "no-91"
match
action drop
exit
exit
----------------------------------------------
IP Filter Entry Matching Criteria
Use the following CLI syntax to configure IPv4 filter matching criteria:
CLI Syntax: config>filter>ip-filter>entry#
match
dscp dscp-name
dst-ip {ip-address/mask | ip-address netmask}
dst-port {{lt | gt | eq} dst-port-number} |
{range start end}
fragment {true | false}
icmp-code icmp-code
icmp-type icmp-type
ip-option ip-option-value [ip-option-mask]
multiple-option {true | false}
option-present {true | false}
src-ip {ip-address/mask | ip-address netmask}
src-port {{lt | gt | eq} src-port-number} |
{range start end}
tcp-ack {true | false}
tcp-syn {true | false}