Alcatel-Lucent 7705 - Show Commands

Filter Command Reference
374 7705 SAR OS Router Configuration Guide
Show Commands
ip
Syntax ip [ip-filter-id |ipv6-filter-id] [entry entry-id] [association | counters]
Context show>filter
Description This command displays IPv4 and IPv6 filter information.
Parameters ip-filter-id | ipv6-filter-id — displays detailed information for the specified filter ID and its filter
entries
Values 1 to 65535
entry-id — displays information on the specified filter entry ID for the specified filter ID only
Values 1 to 64
association — appends information as to where the filter policy ID is applied to the detailed filter
policy ID output
counters — displays counter information for the specified filter ID
Output The following outputs are examples of IP filter information:
• IP filter information (Sample Output, Table 47)
• IP filter information with filter ID specified (Sample Output, Table 48)
• IP filter associations (Sample Output, Table 49)
• IP filter counters (Sample Output, Table 50)
Sample Output
*A-ALU-1# show filter ip
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope Applied Description
-------------------------------------------------------------------------------
1 Template Yes
3 Template Yes
6 Template Yes
10 Template No
11 Template No
-------------------------------------------------------------------------------
Num IP filters: 5
===============================================================================
*A-ALU-1#