Alcatel-Lucent 7705 - Deleting a Logical IP Interface; Interface Command

Service Management Tasks
78 7705 SAR OS Router Configuration Guide
Deleting a Logical IP Interface
The no form of the interface command typically removes the entry, but all entity
associations must be shut down and/or deleted before an interface can be deleted.
1. Before an IP interface can be deleted, it must first be administratively disabled with
the shutdown command.
2. After the interface has been shut down, it can then be deleted with the no
interface command.
CLI Syntax: config>router
no interface ip-int-name
Example: config>router# interface test-interface
config>router>if# shutdown
config>router>if# exit
config>router# no interface test-interface
config>router#