EasyManua.ls Logo

Alcatel-Lucent 7705 - Table 42 MAC Filter Policy Criteria

Alcatel-Lucent 7705
532 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuring Filter Policies
284 7705 SAR OS Router Configuration Guide
MAC Filter Matching Criteria
MAC filter policies compare the matching criteria to traffic at the ingress of a VPLS SAP or
SDP (spoke or mesh). Matching criteria to drop or forward MAC traffic are described in
Table 42.
VLAN Filter Matching Criteria
VLAN filter policies compare the matching criteria to traffic at the ingress of a ring port on
the 2-port 10GigE (Ethernet) Adapter card and 2-port 10GigE (Ethernet) module. Matching
criteria to drop or forward traffic are described in Table 43.
Source port/range Entering a source port/range allows the filter to match a TCP or UDP port and range
values
TCP ACK Entering TCP ACK allows the filter to match the state of the ACK bit set in the
control bits of the TCP header of an IP packet (set or not set)
TCP SYN Entering a TCP SYN allows the filter to match the state of the SYN bit set in the
control bits of the TCP header of an IP packet (set or not set)
Table 41: IP Filter Policy Criteria (Continued)
Criteria Description
Table 42: MAC Filter Policy Criteria
Criteria Description
Frame type Entering the frame type allows the filter to match a specific type of frame format;
for example, Ethernet-II will match only Ethernet-II frames
Source MAC address Entering the source MAC address allows the filter to search for a matching source
MAC address. Enter the source MAC address in the form xx:xx:xx:xx:xx:xx or
xx-xx-xx-xx-xx-xx; for example, 00:dc:98:1d:00:00.
Destination MAC address Entering the destination MAC address allows the filter to search for a matching
destination MAC address. Enter the destination MAC address in the form
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx; for example, 02:dc:98:1d:00:01.
Ethertype Entering an Ethernet type II Ethertype value allows the value to be used as a filter
match criterion. The Ethernet type field is a 2-byte field used to identify the
protocol carried by the Ethernet frame. The Ethertype accepts decimal, hex, or
binary in the range of 1536 to 65535.

Table of Contents

Other manuals for Alcatel-Lucent 7705

Related product manuals