Alcatel-Lucent 7705 - CSM Ports; Management Port

IP Router Command Reference
150 7705 SAR OS Router Configuration Guide
session
Syntax session [src ip-address [dst ip-address | detail]]
Context show>router>bfd
Description This command displays session information.
Parameters ip-address — displays the interface information associated with the specified IP address
Values a.b.c.d (host bits must be 0)
Output The following output is an example of BFD session information, and Table 12 describes the fields.
Sample Output
*A:ALU-1# show router bfd session
===============================================================================
BFD Session
===============================================================================
Interface State Tx Intvl Rx Intvl Mult
Remote Address Protocol Tx Pkts Rx Pkts
-------------------------------------------------------------------------------
net1_1_2 Up (3) 100 100 3
12.1.2.1 None 5029 5029
net1_2_3 Up (3) 100 100 3
12.2.3.2 None 156367 156365
-------------------------------------------------------------------------------
No. of BFD sessions: 2
===============================================================================
*A:ALU-1#
Table 12: Show BFD Session Output Fields
Label Description
State Displays the administrative state for this BFD session
Protocol Displays the active protocol
Tx Intvl Displays the interval, in milliseconds, between the transmitted BFD
messages to maintain the session
Tx Pkts Displays the number of transmitted BFD packets
Rx Intvl Displays the expected interval, in milliseconds, between the received
BFD messages to maintain the session
Rx Pkts Displays the number of received packets
Mult Displays the integer used by BFD to declare when the neighbor is down