Alcatel-Lucent 7705 - Table 57 Show Filter VLAN (no Filter Specified)

Filter Policies
7705 SAR OS Router Configuration Guide 391
vlan
Syntax vlan [filter-id] [entry entry-id]]
Context show>filter
Description This command displays VLAN filter information.
Parameters filter-id — displays detailed information for the specified filter ID and its filter entries
Values 1 to 65535
entry-id — displays information on the specified filter entry ID for the specified filter ID
Values 1 to 65535
Output The following outputs are examples of VLAN filter information:
• no parameters specified (Sample Output, Table 57)
• filter-id specified (Sample Output, Table 58)
Sample Output
When no parameters are specified, a brief listing of VLAN filters is displayed.
*A-ALU-1:show>filter# vlan
===============================================================================
VLAN Filters Total: 2
===============================================================================
Filter-Id Scope Applied Description
-------------------------------------------------------------------------------
2 Template Yes VLAN_filter_2
65535 Template No
-------------------------------------------------------------------------------
Num VLAN filters: 2
===============================================================================
*A-ALU-1:show>filter#
Table 57: Show Filter VLAN (No Filter Specified)
Label Description
Filter-Id The VLAN filter ID
Scope Template — the VLAN filter policy is always of type Template
Applied No — the filter policy ID has not been applied
Yes — the filter policy ID is applied
Description The VLAN filter policy description