Alcatel-Lucent 7705 - Configuring Filter Log Policies

Common Configuration Tasks
306 7705 SAR OS Router Configuration Guide
Configuring Filter Log Policies
Use the following CLI syntax to configure filter log policy:
CLI Syntax: config>filter# log log-id
description description-string
destination memory num-entries
destination syslog syslog-id
summary
no shutdown
summary-crit dst-addr
summary-crit src-addr
wrap-around
The following example displays a filter log configuration.
A:ALU-48>config>filter>log# info detail
---------------------------------------------
description "Test filter log."
destination memory 1000
wrap-around
no shutdown
---------------------------------------------
A:ALU-48>config>filter>log#