Alcatel-Lucent 7705 - Configuring a Prefix List

Route Policies
7705 SAR OS Router Configuration Guide 443
The following example displays a damping configuration:
A:ALU-B>config>router>policy-options# info
----------------------------------------------
damping "damptest123"
half-life 15
max-suppress 60
reuse 750
suppress 1000
exit
----------------------------------------------
A:ALU-B>config>router>policy-options#
Configuring a Prefix List
Use the following CLI syntax to configure a prefix list:
CLI Syntax: prefix-list name
prefix ip-prefix/prefix-length [exact |longer |
through length | prefix-length-range length1-
length2]
The following example displays prefix list configuration command usage. These commands
are configured in the config>router context.
Example: config>router>policy-options# prefix-list
policy-options# prefix-list western
policy-options>prefix-list# prefix 10.10.0.1/32
policy-options>prefix-list# prefix 10.10.0.2/32
policy-options>prefix-list# prefix 10.10.0.3/32
policy-options>prefix-list# prefix 10.10.0.4/32
The following example displays the prefix list configuration.
A:ALU-B>config>router>policy-options# info
----------------------------------------------
prefix-list "western"
prefix 10.10.0.1/32 exact
prefix 10.10.0.2/32 exact
prefix 10.10.0.3/32 exact
prefix 10.10.0.4/32 exact
exit
----------------------------------------------
A:ALU-B>config>router>policy-options>#