Alcatel-Lucent 7705 - Creating a VLAN Filter Policy; VLAN Filter Policy

Filter Policies
7705 SAR OS Router Configuration Guide 303
Creating a VLAN Filter Policy
Configuring and applying filter policies is optional. Each filter policy must have the
following:
• the filter type specified (VLAN)
• a filter policy ID
• a default action, either drop or forward
• at least one filter entry
• specified matching criteria (see VLAN Entry Matching Criteria)
VLAN Filter Policy
Use the following CLI syntax to configure a VLAN filter policy:
CLI Syntax: configure>filter>vlan-filter filter-id [create]
description description-string
default-action {drop | forward}
Example: configure>filter>vlan-filter 2 create
configure>filter>vlan-filter# description VLAN_filter_2
configure>filter>vlan-filter# default-action drop
The following example displays a VLAN filter configuration.
A:ALU-7>config>filter# info
----------------------------------------------
...
vlan-filter 2 create
description "VLAN_filter_2"
default-action drop
exit
----------------------------------------------
A:ALU-7>config>filter#