VRRP Command Reference
266 7705 SAR OS Router Configuration Guide
Adv Sent : 139 Adv Received : 1
Pri Zero Pkts Sent : 2 Pri Zero Pkts Rcvd: 0
Preempt Events : 0 Preempted Events : 0
Mesg Intvl Discards : 0 Mesg Intvl Errors : 0
Addr List Discards : 0 Addr List Errors : 0
Auth Type Mismatch : 0 Auth Failures : 0
Invalid Auth Type : 0 Invalid Pkt Type : 0
IP TTL Errors : 0 Pkt Length Errors : 0
Total Discards : 0
Table 40: Show Router VRRP Instance Summary Output Fields
Label Description
Owner Yes — Specifies that the virtual router instance as owning the virtual
router IP addresses
No — Indicates that the virtual router instance is operating as a
non-owner
VRRP State Specifies whether the VRRP instance is operating in a master or backup
state
Primary IP of Master The IP address of the VRRP master
Primary IP The IP address of the VRRP owner
Standby-Forwarding Specifies whether this VRRP instance allows forwarding packets to a
standby router
Virt MAC Addr The virtual MAC address used in ARP responses when the VRRP virtual
router instance is operating as a master
Config Mesg Intvl The administrative advertisement message timer used by the master to
send VRRP messages and to derive the master down timer as backup
Base Priority The base-priority value used to derive the in-use priority of the virtual
router instance as modified by any optional VRRP priority control policy
In-Use Priority The current in-use priority associated with the VRRP virtual router
instance
Master Since The date and time when operational state of the virtual router changed to
master. For a backup outer, this value specifies the date and time when
it received the first VRRP message from the virtual router which is the
current master.
To Next Page
Loading...
