Filter Command Reference
398 7705 SAR OS Router Configuration Guide
summary
Syntax summary
Context show>security
Description This command displays a summary of NAT security information.
Output The following output is an example of NAT summary information.
Sample Output
*A-ALU-1# show security summary
===============================================================================
Security
===============================================================================
Policy State : Committed
Last Commit : 07/11/2014 03:05:34
Policies : 2
Profiles : 2
Zones : 2
Sessions
Table 60: Show Security Profile Output Fields (Detail)
Label Description
Profile Id The NAT profile ID
Name The name of the profile
Description The profile description
TCP Syn-Rcvd Timeout configured for a TCP session in a SYN state
TCP Transitory Timeout configured for a TCP session in a transitory state
TCP Established Timeout configured for a TCP session in an established state
TCP Time-Wait Timeout configured for a TCP session in a time-wait state
UDP Initial Timeout configured for a UDP session in an initial state
UDP Idle Timeout configured for a UDP session in an idle state
UDP DNS Timeout configured for a UDP session with destination port 53
ICMP Request Timeout configured for an ICMP session in which an ICMP request is
sent but no ICMP response is received
Applied No — the security profile ID has not been applied
Yes — the security profile ID is applied
To Next Page
Loading...
