Filter Policies
7705 SAR OS Router Configuration Guide 399
Active : 5223 Limit : 6144
Utilization : 85% (ALARM)
Hi-Wtr-Mark : 80% Lo-Wtr-Mark : 50%
===============================================================================
*A-ALU-1#
zone
Syntax zone [service service-id] [router router-instance]
zone [zone-id |zone-name] [detail]
zone [zone-id |zone-name] interface
zone [zone-id |zone-name] statistics
Context show>security
Description This command displays NAT zone information.
Parameters service-id — displays detailed information for the specified service ID
Values 1 to 2147483647
router-instance — displays detailed information for the specified router instance
Values 1 to 2147483647
zone-id — displays detailed information for the specified zone ID
Values 1 to 65534
zone-name — displays information for the specified name
Values 1 to 32 characters (must start with a letter)
detail — displays detailed information on the specified zone 
interface — specifies the router interface
statistics — displays statistics for the specified zone ID
Output The following output is an example of zone information:
Sample Output
*A-ALU-1# show security zone 1 statistics
===============================================================================
Zone Statistics
===============================================================================
Inbound Outbound
-------------------------------------------------------------------------------
Total Sessions 76798 0
Active Sessions 2555 0
Dropped
Packets 1184369 0
Octets 125543114 0
Default Action
Packets 1201223 623
Octets 127329638 145630