Alcatel-Lucent 7705 - Clear Commands

Filter Command Reference
404 7705 SAR OS Router Configuration Guide
Clear Commands
ip
Syntax ip ip-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description This command clears the counters associated with the IPv4 filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default clears all counters associated with the IPv4 filter policy entries
Parameters ip-filter-id — the IPv4 filter policy ID
Values 1 to 65535
entry-id — only the counters associated with the specified filter policy entry will be cleared
Values 1 to 64
ingress — only the ingress counters will be cleared
egress — only the egress counters will be cleared
ipv6
Syntax ipv6 ipv6-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description This command clears the counters associated with the IPv6 filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default clears all counters associated with the IPv6 filter policy entries
Parameters ipv6-filter-id — the IPv6 filter policy ID
Values 1 to 65535
entry-id — only the counters associated with the specified filter policy entry will be cleared
Values 1 to 64
ingress — only the ingress counters will be cleared
egress — only the egress counters will be cleared