Alcatel-Lucent 7705 - Page 405

Filter Policies
7705 SAR OS Router Configuration Guide 405
log
Syntax log log-id
Context clear>filter
Description This command clears the entries associated with the specified filter log. The clear command applies
only to logs whose destination is to memory.
Parameters log-id — the filter log ID destination expressed as a decimal integer
Values 101 to 199
mac
Syntax mac mac-filter-id [entry entry-id] [ingress | egress]
Context clear>filter
Description This command clears the counters associated with the MAC filter policy.
By default, all counters associated with the filter policy entries are reset. The scope of which counters
are cleared can be narrowed using the command line parameters.
Default clears all counters associated with the MAC filter policy entries
Parameters mac-filter-id — the MAC filter policy ID
Values 1 to 65535
entry-id — only the counters associated with the specified filter policy entry will be cleared
Values 1 to 64
ingress — only the ingress counters will be cleared
egress — only the egress counters will be cleared (currently not supported on the 7705 SAR)
session
Syntax session [session-id] [statistics]
Context clear>security
Description This command clears the specified sessions and can also clear the associated session statistics.
Parameters session-id — clears the sessions associated with the specified session ID
Values 1 to 6144 (7705 SAR-8/7705 SAR-18)
1 to 4096 (7705 SAR-H/7705 SAR-Hc/7705 SAR-Wx)
statistics — clears statistics for the specified session ID