Alcatel-Lucent 7705 - Table 48 Show Filter Output Fields (Filter ID Specified)

Filter Command Reference
376 7705 SAR OS Router Configuration Guide
*A-ALU-1# show filter ipv6 1
===============================================================================
IPv6 Filter
===============================================================================
Filter Id : 1 Applied : No
Scope : Template Def. Action : Drop
Entries : 1
Description : (Not Specified)
-------------------------------------------------------------------------------
Filter Match Criteria : IPv6
-------------------------------------------------------------------------------
Entry : 1 (Inactive)
Description : (Not Specified)
Log Id : n/a
Src. IP : ::/0 Src. Port : None
Dest. IP : ::/0 Dest. Port : None
Next Header : Undefined Dscp : Undefined
ICMP Type : Undefined ICMP Code : Undefined
TCP-syn : Off TCP-ack : Off
Match action : Drop
Ing. Matches : 0 pkts
Egr. Matches : 0 pkts
===============================================================================
*A-ALU-1#
Table 48: Show Filter Output Fields (Filter ID Specified)
Label Description
Filter Id The IP filter policy ID
Scope Template — the filter policy is of type template
Exclusive — the filter policy is of type exclusive
Entries The number of entries configured in this filter ID
Applied No — the filter policy ID has not been applied
Yes — the filter policy ID is applied
Def. Action Drop — the default action for the filter ID for packets that do not match
the filter entries is to drop
Filter Match Criteria IP — the filter is an IPv4 filter policy
IPv6 — the filter is an IPv6 filter policy
Entry The filter entry ID. If the filter entry ID indicates that the entry is
Inactive, the filter entry is incomplete as no action has been specified.
Description The IP filter policy description
Src. IP The source IP address and prefix length match criterion
Dest. IP The destination IP address and prefix length match criterion