Alcatel-Lucent 7705 - Debug Commands

IP Router Configuration
7705 SAR OS Router Configuration Guide 205
Debug Commands
destination
Syntax destination trace-destination
Context debug>trace
Description This command specifies the destination of trace messages.
Parameters trace-destination — the destination to send trace messages to
Values stdout, console, logger, memory
enable
Syntax [no] enable
Context debug>trace
Description This command enables the trace.
The no form of the command disables the trace.
trace-point
Syntax [no] trace-point [module module-name] [type event-type] [class event-class] [task
task-name] [function function-name]
Context debug>trace
Description This command adds trace points.
The no form of the command removes the trace points.
router
Syntax router router-instance
Context debug
Description This command configures debugging for a router instance.